Commission a common door

Here you can find information about the following types of door commissioning:

With access manager and registration unit (without hardware ID)

Here you will find the relevant video instruction for this article.

  • You are logged into the resivo admin portal.
  • You have the Component management authorization.
  • You have the real estate’s REM setup card with you.
  • You have created the common door in the resivo admin portal and it has the status Planned.
  1. In the menu, click Doors.
  1. Hold the REM setup card at the registration unit.
  • The access manager appears in the Doors menu with the status New.
  1. In the resivo admin portal click Identify.
  • The access manager flashes green a couple of times.
  1. Click the access manager.
  • The following view opens:
  1. Select Planned component.
    Note: If the component has not yet been planned, you can do this with New component here.
  1. Select the earlier planned common door from the door list.
  1. Click Save.
  • The planned common door is connected to the access manager.
  • You can now open the common door with the master key or remotely by using the resivo admin portal.

With access manager and registration unit (with hardware ID)

Here you will find the relevant video instruction for this article.

  • You are logged into the resivo admin portal.
  • You have the Component management authorization.
  • You have the real estate’s REM setup card with you.
  • You have created the common door in the resivo admin portal and when doing so typed in or scanned the hardware ID.
  1. In the menu, click Doors.
  1. Hold the REM setup card at the registration unit.
  1. Reload the website of the resivo admin portal.
  • The planned common door has the status Online.
  • The planned common door is connected to the access manager.
  • You can now open the common door with the master key or remotely by using the resivo admin portal.

With access manager and compact reader (with/without hardware ID)

The procedure for commissioning with the access manager and compact reader is principally the same as in the case of an access manager with registration unit. The registration unit is absolutely necessary and can be uninstalled after the commissioning.

  • See prerequisites for commissioning with the access manager and registration unit (with/without hardware ID).
  1. Follow the steps for commissioning with the access manager and registration unit (with/without hardware ID).
  1. Uninstall the registration unit if it is not required.
  1. Transfer the VCP to the compact reader.
  • The common door is in operation.
  • You can now open the common door with the master key or remotely open it using the resivo admin portal.

With digital cylinder or c-lever (offline)

  • You have installed the resivo utility app on your smartphone and are logged in.
  • You have the Facility management authorization.
  • You are on site in front of the door component.
  • You have the real estate’s REM setup card with you. (Exception: wireless components with firmware version .46 or later can be commissioned with the virtual REM setup card which is in the resivo utility app.)
  • The common door has the status Planned.
  1. Open the resivo utility app.
  • The following view opens:
  1. Select the real estate in which the common door is located.
  • The following view opens:
  1. Tap Doors in the menu.
  1. Tap the common door.
  1. Tap Commissioning.
  1. Follow the steps in the app.
  • The common door is in operation.
Also see about this